How To Do Litebrite Templates

Download Article

Litebrite is a unique toy where its user can create low-cal-up designs, using colored pegs and a slate. Once y'all press the push button, the pegs light up! Read on to observe out how to use Litebrite, and create absurd pictures.

Steps Download Commodity

one

If using a brand new kit, take proper measures to get together it well. Take out the paper outlines, the board, and bag of pegs. Yous will demand either pocket-size or big batteries, but they do not come with the pack. You will need to purchase some from a store. There will also be an education guide just in case you demand more assistance.
2

If using a template, have ane of the outlined pictures and slide it onto the board from the acme. In that location volition exist letters representing the colors outlining how the motion picture will await like one time you add the colorful pegs. Go along the moving-picture show in identify by poking whatever colored pegs on each corner.

Advertising
three
Poke pegs through depending on the messages representing different colors. The first time you go Litebrite, poke the pegs softly, just non loosely, or it won't be easy to take out when doing another moving-picture show. Here is a short guide:
- Due west - clear pegs
- V - imperial/violet pegs
- P - pink pegs
- O - orange pegs
- Grand - green pegs
- B - blue pegs
- R - cherry-red pegs
- Y - yellow pegs
4

When taking out the pegs, accept out the ones on the corners commencement so it volition be easier. Pull information technology off carefully by twisting it around, and one time it'due south loose enough, pull it out. This may have a large amount of time if you put lots of pegs in the moving picture, and if you poked them in very hard. Consider poking them a bit loose so it will be easier.
5

Slide the pic out carefully. Fifty-fifty though it has holes in it, you can still utilize information technology over again later. Pull it out from the top, but attempt not to rip information technology. Make sure all the pegs are out.
half dozen

Slide in another motion picture and repeat the process in a higher place of poking pegs in to create a motion picture.
7

To brand the picture lite upwardly, screw out the screw on the battery container, and put a battery in. Printing the button on the lath to make it calorie-free up. Perhaps, y'all can also press it a 2d time to make it blink. Press information technology a third fourth dimension to turn it off.
8

Store pegs in the empty container at the bottom of the board when you are done. Remaining pegs of a picture can also exist stored in the container. Employ the edge to open information technology and close it as well. Be careful withal, every bit when yous open it, some pegs may wing out of the container because it can be a bit strong to pull it, and you may lose pegs.

Advert

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertising

Try non to lose any pegs if some of the pegs come out when yous open the container. Look everywhere where you saw pegs land over to and collect lost pegs.
Whenever you find a lost peg, immediately put it in the peg container.
Some Litebrites don't have an selection to arrive blink and flash.
Don't poke the pegs super difficult in the letters, or it will exist hard to have them out when you practise a new picture outline.
Pinkish, orangish, and scarlet colors tin be hard to distinguish considering they look akin, especially pink and orange. It is appropriate to put in the pegs in a well-lit area, or you lot may not be able to tell betwixt pink, orange, or red and brand errors.